UniCarriers FG20 Series Operation & Maintenance Manual page 36

When working in a group, have a leader
and follow his instructions
Before starting inspection, shut off the
engine
Engine-powered trucks
Make sure the engine is shut off before trying to
start inspection or maintenance.
Before starting inspection, turn off the
key switch
Electric trucks
Make sure to turn off the key switch before trying to
start inspection or maintenance.
Unless otherwise specified, shut off the
engine
Engine-powered trucks
U n l e s s o t h e r w i s e s p e c i f i e d , i n s p e c t i o n o r
maintenance should be performed with the engine
shut off.
Unless otherwise specified, turn off the
key switch
Electric trucks
U n l e s s o t h e r w i s e s p e c i f i e d , i n s p e c t i o n o r
maintenance should be performed with the key
switch turned off.
Before starting inspection or
maintenance, place the control levers in
neutral
INSPECTION AND SERVICE
Be careful so as not to get your fingers caught when
closing the battery cover or doors.
1-31
Make sure the forks and other attachment
(if any) are on the ground
If unavoidable to work under raised forks
or attachment, use a stable support
under the inner mast and/or the carriage
to prevent the forks or attachment from
falling down unexpectedly
Do not put your feet under the forks
Use caution not to get your fingers
pinched in the floor plates or hood