Table of Contents
Advertisement
V2403
The sedimenter separates water from fuel.
When the sedimenter warning light comes on, it
indicates that more than the specified amount of water
has accumulated in the sedimenter. Remove the water
in the following matter:
1. Shut off the engine.
2. Turn the sedimenter cock 90° upward to close it.
3. Remove the retaining ring and drain the filter cup.
4. Reinstall the sedimenter. Reset the cock into the
original position.
5. Loosen the fuel filter drain plug.
6. Pump the priming pump on top of the fuel filter a few
times to drain water from inside the filter.
7. After draining water, reinstall the drain plug and
tighten securely.
CAUTION
Wipe away any spilt fuel from areas around the
sedimenter. There is a danger of causing a fire
hazard.
8. Start the engine and make sure the sedimenter
warning light is off.
PREVENTIVE MAINTENANCE
4-22
SEDIMENTER
FILTER CUP
FUEL FILTER
DRAIN PLUG
RETAINING RING
COCK
PRIMING PUMP
Hide quick links:
Advertisement
Table of Contents
