Table of Contents
Advertisement
SEQUENTIAL LEVER MIXER
Installation & Maintenance Instructions
technical data
Working Pressure Range
Recommended Maximum Pressure
Working Temperature Range
For use with potable water only.
compliance
*Enware products are to be installed in
accordance with the Plumbing Code of
Australia and AS/NZS3500.
Reference should also be made to the
Australasian Health Facility Guidelines (AHFG),
ABCB and Local Government regulations when
considering the choice of, and the installation
of these products.
Thermostatic Mixing Valves and Pressure
Reduction Valves may be required to comply
with maximum temperature and pressure
requirements.
please note
Enware Australia advises:
1. Due to ongoing Research and Development,
specifications may change without notice;
2. Component specifications may change on
some export models.
2
Call 1300 369 273
50-800 kPa
500 kPa*
5 °C – 85 °C *
before installation
Before proceeding with installation
• Ensure all operating & dimensional
specifications are suitable for the intended
installation.
• Ensure all supply lines are flushed
thoroughly to remove debris prior to
the installation of this product as per
AS/NZS 3500.1. Strainers (40 mesh) are
recommended if debris is an ongoing
problem.
www.enware.com.au
Advertisement
Table of Contents
Need help?
Do you have a question about the LEVA Series and is the answer not in the manual?