Advertisement
Quick Links
EMERGENCY SHOWER,
EYE & EYE/FACE WASH
Installation, Operating & Maintenance Instructions
ECE030
ECE060
ECE090
ECE240
ECE270
ENBE060
ENBE090
ENBE240
ENBE270
NOTE: THIS DOCUMENT IS TO BE LEFT ONSITE WITH FACILITY MANAGER AFTER INSTALLATION
I00067_Dec 17
Call 1300 369 273
www.enware.com.au
Enware Australia Pty Limited
9 Endeavour Rd Caringbah NSW 2229 Australia
Ph: +61 2 8556 4000 Fax: +61 2 8556 4055
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for enware ECE030
Summary of Contents for enware ECE030
- Page 1 NOTE: THIS DOCUMENT IS TO BE LEFT ONSITE WITH FACILITY MANAGER AFTER INSTALLATION I00067_Dec 17 Call 1300 369 273 www.enware.com.au Enware Australia Pty Limited 9 Endeavour Rd Caringbah NSW 2229 Australia Ph: +61 2 8556 4000 Fax: +61 2 8556 4055...
-
Page 2: Product Descriptions
ECE090 ECE060 ECE030 EMERGENCY STAINLESS STEEL EMERGENCY STAINLESS STEEL EMERGENCY STAINLESS STEEL SHOWER COMBINATION SHOWER WITH COMBINATION SHOWER WITH HAND/ HAND OPERATED EYEWASH FOOT OPERATED EYEWASH ECE240 ECE270 ENBE060 EMERGENCY STAINLESS STEEL EMERGENCY STAINLESS STEEL EMERGENCY STAINLESS STEEL... -
Page 3: Technical Information
Eye/Face Wash Minimum Flow 11.4 lpm (3 US gpm) At Working Pressure: 210 kPa (30 psi) Shower Flow 76 lpm (20 US gpm) Enware Performance Eye Wash Flow 17 lpm (4.5 US gpm) Eye/Face Wash Flow 26 lpm (6.9 US gpm) Waste Water Outlet Size 38.1 mm (1½”) OD... - Page 4 ECE030 ECE060 ECE090 ECE240 ECE270 REVISION MODIFIED REV. DATE DESCRIPTION 24/05/12 960 WAS 965 20/09/13 INSTALL DETAILS ADDED Description 4/12/14 2639 PULL HANDLE POSITION CHANGED Upper Frame with Ball Valve 794250 WAS 794230; 794592 WAS 790481; 794591 ADDED; 995 WAS...
- Page 5 Eye Wash Outlet Assembly Eye/Face Wash Outlet Assembly Upper Frame with Ball Valve Base Frame with Eye Wash Control Pull Handle Shower Arm and Rose Foot Pedal with Cable* Inspection Tag * ENBE090 and ENBE270 only Call 1300 369 273 www.enware.com.au...
- Page 6 For combination showers, make Upper Frame sure the arm of the shower is centered over the Eye (Eye/Face) wash. Stainless Steel Union Place upper part onto lower part vertically align, then tighten the union. Base Frame IMAGE 4 www.enware.com.au Call 1300 369 27...
- Page 7 - ALL THREADS TO BE CHAM - DIMENSIONS ARE IN mm's - DO NOT SCALE OFF DIMEN TOLERANCE EXCEPT WHERE S NO DECIMAL POINT ONE DECIMAL PLACE ANGLES ENWARE RESERVES THE RIGHT TO AMMEND PRODUCT SPECIFICAT Call 1300 369 273 www.enware.com.au AND DESIGNS WITHOUT NOTICE...
- Page 8 Legionella risk. Place dust covers over Eye (Eye/Face) wash outlets. Mount appropriate Shower and Eye (Eye/Face) wash signage as required - refer to Enware’s Product Guide IMAGE 12 R 406 min. Free from obstructions or call Customer Service on 1300 369 279.
-
Page 9: Maintenance
ANSI Z358.1-2009 or AS/NZS 4775- 2007 whichever is applicable to the installation. DRAWN Call 1300 369 273 GENERAL NOTES: www.enware.com.au CHECKED - REMOVE ALL BURRS AND SHARP APPROVED EDGES UNLESS OTHERWISE STATED - ALL THREADS TO BE CHAMFERED... - Page 10 The valve shall be simple to operate and go peak. (Sec 7.1, 9.1 (c), 7.3.1) from closed to fully open in one second or less. The valve shall be corrosion resistant. (Sec 7.2, 8.2, 9.1 (c), 9.1 (d)) www.enware.com.au Call 1300 369 27...
- Page 11 Outlets shall be protected from airborne contaminants. hands. The valve shall be simple to operate and (Sec. 5.1.3, 6.1.3, 7.1) go from “off” to “on” in one second or less. (Sec. 5.2, 6.2, 7.2) Call 1300 369 273 www.enware.com.au...
Need help?
Do you have a question about the ECE030 and is the answer not in the manual?
Questions and answers