Getting To Know Your; Fios Home Wi-Fi Extender - Verizon Fios E3200 User Manual

GETTING TO KNOW YOUR FIOS
HOME WI-FI EXTENDER
1.3/ GETTING TO KNOW YOUR FIOS HOME WI-FI
EXTENDER
1.3a/ FRONT PANEL
The front panel's unified button allows
quick access to the Wi-Fi Protected
Setup (WPS) feature and pairing mode.
The Status LED will be on
white and solid when your
Fios Home Wi-Fi Extender is turned on,
connected to the internet, and functioning normally.
Status LED
Condition Status
Normal
Issue(s)
Power
Please refer to section 5.0 for details on the rear LEDs.
LED Color

Fios Home Wi-Fi Extender

WHITE Normal operation (solid)
Fios Home Wi-Fi Extender is booting (fast
blink)
BLUE Pairing mode (slow blink)
Pairing successful (solid)
GREEN Wi-Fi has been turned off (solid)
YELLOW No internet connection (solid)
Wi-Fi Extender is too far from the Router.
Poor backhaul signal (slow blink)
Wi-Fi Extender is too close to the Router.
Poor Wi-Fi coverage (fast blink)
RED Hardware/System failure detected (solid)
Overheating (fast blink)
Pairing Failure (slow blink)
OFF Power off