Page 2
Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Use of another adapter could result in damage to the unit. The following power adaptor is qualified for use with this Verizon Wi-Fi Extender: This unit must be powered by LUCENT TRANS, model 1A95 or equivalent UL...
Table of Contents Chapter 1 Introduction ............................. 1 Unboxing Information ......................... 1 1.2 Key Features ............................1 1.3 Top Panel (LEDs) ..........................1 1.4 Back Panel ............................4 Chapter 2 Connecting the Wi-Fi Extender ....................5 2.1 Setting up the Wi-Fi Extender ......................5 2.2 Connecting Other Devices .......................
Chapter 1 Introduction This chapter includes a list of items included with the LVM1 Wi-Fi Extender, an overview of the Wi-Fi Extender’s features, and a description of the user interface and ports on the Wi-Fi Extender. Unboxing Information Inside the product package for the LVM1 Wi-Fi Extender, you should find the following items: •...
Page 6
Alexa, interrupt an Alexa response, or reset the Alexa Voice Service (AVS). To reset AVS, press and hold down the button for 5 seconds. 3. Volume Adjustment Buttons Touch-sensitive volume adjustment buttons are located on the left and right sides of the touchpad on top of the Wi-Fi Extender.
Page 7
Wi-Fi quality between IDU and the Wi-Fi Animation extender is poor. Yellow and white ring Wi-Fi Extender connected to Router, but no Animation Internet connection (5G node might be Red/Amber down) Wi-Fi Extender connected to Router, Wi-Fi Solid White and Internet working well. (Turns off after 30 seconds) Fast Blink Usual Functions...
Back Panel LAN Ports Two 1 Gbps LAN ports enable you to connect devices to the Wi-Fi Extender via Ethernet cables. 2. Reset Pinhole To reset the Wi-Fi Extender to factory defaults, insert a pin into the pinhole, press down, and hold for 5 seconds.
Chapter 2 Connecting the Wi-Fi Extender This section describes how to set up and configure your Wi-Fi Extender. Setting up the Wi-Fi Extender Unbox the Wi-Fi Extender, AC adaptor, and Ethernet cable. 2. Set up a WPS connection between the Wi-Fi Extender and the 5G Home Router by pressing their multi-purpose pairing buttons.
Pairing your mobile device and turning the Wi-Fi Extender into a Bluetooth speaker Press the multi-purpose pairing button on the Wi-Fi Extender. 2. Turn on Bluetooth on your mobile device. You will then see “Verizon-5G-Home-XXXX-BT” shown on the list of Bluetooth devices available for pairing. Click on the name to establish a connection between the Wi-Fi Extender and your mobile device.
Chapter 3 Product Specifications Wi-Fi 2.4GHz 802.11ax 2x2 MIMO 5GHz low band 802.11ax 4x4 MIMO 5GHz high band 802.11ax 2x2 MIMO Backward compatible with 11ac/11n/11b Bluetooth Memory DDR4 RAM 2GB Storage eMMC 8GB Dimension Height: 235.8 mm ...
Need help?
Do you have a question about the 5G Home Wi-Fi Extender and is the answer not in the manual?
Questions and answers