Verizon Fios E3200 User Manual page 26

maIN SCREEN
4. After pressing the unified button (WPS) on your Fios Home
Wi-Fi Extender, you have two minutes to press the WPS
button on the client device before the WPS session times
out.
When the unified button (WPS) on your Fios Home Wi-Fi
Extender is pressed, the Status LED on the front of your
Fios Home Wi-Fi Extender begins flashing blue. The flashing
continues until WPS pairing to the client device completes
successfully. At this time, the Status LED turns solid blue.
If WPS fails to establish a connection to a wireless
client device within two minutes, the Status LED on your
Fios Home Wi-Fi Extender flashes red for two minutes to
indicate the WPS pairing process was unsuccessful. After
flashing red, the light returns to solid white to indicate that
Wi-Fi is on.