Jeep Compass 2020 Owner's Manual page 471

Setting Name
Set Date
NOTE:
Within the "Set Date" setting, press the corresponding Arrow buttons on the touchscreen to adjust to the correct date.
Show Time Status — If
Equipped
Sync Time — If Equipped
Safety/Assistance
After pressing the Safety/Assistance button on the touchscreen, the following settings will be available:
Setting Name
ParkView Backup Camera
Delay
NOTE:
The "ParkView Backup Camera Delay" setting determines whether or not the screen will display the rear view image with dynamic
grid lines for up to 10 seconds after the vehicle is shifted out of REVERSE (R). This delay will be canceled if the vehicle's speed
exceeds 8 mph (13 km/h), the transmission is shifted into PARK (P), or the ignition is switched to the OFF position.
ParkView Backup Camera
Active Guidelines
NOTE:
The "ParkView Backup Camera Active Guidelines" setting overlays the Backup Camera image with active, or dynamic, grid lines
to help illustrate the width of the vehicle and its projected backup path, based on the steering wheel position when the option is
checked. A dashed center line overlay indicates the center of the vehicle to assist with parking or aligning to a hitch/receiver.
Selectable Options
Up Arrow
On
On
Selectable Options
On
On
MULTIMEDIA 469
Down Arrow
Off
Off
Off
Off
9