Uconnect Settings - Jeep Compass 2020 Owner's Manual

NOTE:
• FCA US LLC or your dealer may contact you directly
regarding software updates.
• To help further improve vehicle security and minimize the
potential risk of a security breach, vehicle owners should:
•Routinely check www.driveuconnect.com
dents) or www.driveuconnect.ca
to learn about available Uconnect software updates.
•Only connect and use trusted media devices (e.g.
personal mobile phones, USBs, CDs).
Privacy of any wireless and wired communications cannot
be assured. Third parties may unlawfully intercept informa-
tion and private communications without your consent. For
further information, refer to "Data Collection & Privacy" in
your Uconnect Owner's Manual Supplement or "Onboard
Diagnostic System (OBD II) Cybersecurity" in "Getting To
Know Your Instrument Panel".

UCONNECT SETTINGS

The Uconnect system uses a combination of buttons on the
touchscreen and buttons on the faceplate located on the
center of the instrument panel. These buttons allow you to
access and change the Customer Programmable Features.
Many features can vary by vehicle.
(US Resi-
(Canadian Residents)
Buttons on the faceplate are located below and/or beside the
Uconnect system in the center of the instrument panel. In
addition, there is a Scroll/Enter control knob located on the
right side. Turn the control knob to scroll through menus and
change settings. Push the center of the control knob one or
more times to select or change a setting.
Your Uconnect system may also have Screen Off and Mute
buttons on the faceplate.
Push the Screen Off button on the faceplate to turn off the
Uconnect screen. Push the button again or tap the screen to
turn the screen on.
Push the Back Arrow button to exit out of a Menu or certain
option on the Uconnect system.
MULTIMEDIA 465
9