Jeep Compass 2020 Owner's Manual page 266

264 STARTING AND OPERATING
Active Drive With Low Control — (Trailhawk models
only)
Selec-Terrain Switch (Trailhawk)
The 4WD LOW mode helps to improve the off-road perfor-
mance in all modes. To enable 4WD LOW, please follow the
steps below:
Enabling 4WD LOW
With the vehicle stationary, the ignition in the ON/RUN
position or with the engine running, shift the transmission
into NEUTRAL (N) and push the button once 4WD LOW.
The instrument cluster will display the message "4WD LOW"
once the shift is complete.
NOTE:
• Both LOCK and LOW LED lights will blink and then
become active on the Selec-Terrain switch until the shift is
complete.
• The instrument cluster display will illuminate the "4WD
LOW" icon.
Disabling 4WD LOW
To disable the 4WD LOW mode, the vehicle must be
stationary and the transmission shifted into NEUTRAL.
Push the 4WD LOW button once.