Jeep Compass 2020 Owner's Manual page 186

184 SAFETY
pushing or squeezing the release button. To verify the
shoulder belt anchorage is latched, pull downward on the
shoulder belt anchorage until it is locked into position.
WARNING!
• Wearing your seat belt incorrectly could make your
injuries in a collision much worse. You might suffer
internal injuries, or you could even slide out of the seat
belt. Follow these instructions to wear your seat belt
safely and to keep your passengers safe, too.
• Position the shoulder belt across the shoulder and chest
with minimal, if any slack so that it is comfortable and
not resting on your neck. The retractor will withdraw
any slack in the shoulder belt.
• Misadjustment of the seat belt could reduce the effec-
tiveness of the safety belt in a crash.
• Always make all seat belt height adjustments when the
vehicle is stationary.
Second Row Center Seat Belt Operating Instructions
The second row center seat belt may feature a seat belt with
a mini-latch plate and buckle. The mini-latch plate and
buckle, if equipped, should remain connected at all times. If
the mini-latch plate and buckle become disconnected, they
must be properly reconnected prior to the rear center seat
belt being used by an occupant.
1. Grasp the mini-latch plate and pull the seat belt over the
seat.
Pulling Out The Latch Plate