Jeep Compass 2020 Owner's Manual page 224

222 SAFETY
Frequently Asked Questions About Installing Child Restraints With LATCH
What is the weight limit (child's weight
+ weight of the child restraint) for using
the LATCH anchorage system to attach
the child restraint?
Can the LATCH anchorages and the
seat belt be used together to attach a
rear-facing or forward-facing child
restraint?
Can a child seat be installed in the
center position using the inner LATCH
lower anchorages from the outboard
seating positions?
Use the LATCH anchorage system until the
combined weight of the child and the child
65 lbs (29.5 kg) restraint is 65 lbs (29.5 kg). Use the seat belt and
tether anchor instead of the LATCH system once
the combined weight is more than 65 lbs (29.5 kg).
Do not use the seat belt when you use the LATCH
anchorage system to attach a rear-facing or
forward-facing child restraint.
No Booster seats may be attached to the LATCH
anchorages if allowed by the booster seat
manufacturer. See your booster seat owner's
manual for more information.
You can install child restraints with flexible lower
anchors in the center position. The inner
Yes anchorages are 16 inches (400 mm) apart. Do not
install child restraints with rigid lower anchors in
the center position.