General Safety Instructions; Intended Use; Technical Data; Reasonably Foreseeable Misapplication - SCHUNK KSC-F 80 Installation And Operating Instructions Manual

_________________________________________________________________________________________
2

General safety instructions

2.1 Intended use

The clamping device may only be used in accordance with the technical data and has been
designed for stationary application on milling machines in an industrial environment.
Using the device in accordance with the intended purpose includes compliance with the
commissioning, installation and operating instructions, and with the environmental and
service conditions as provided by the manufacturer.
The manufacturer accepts no liability for damage resulting from non-intended use.

2.1.1 Technical data

Version
KSC-F 80
KSC-F 125
KSC-F 160
KSC-F 80
Anzugs-Drehmoment / Spannkraft
Nm
60
50
40
30
20
10
0
0 10
Exposure to loads in excess of the max. clamping torque results in damage to the spindle.
Weight:
KSC-F 80 L-214
KSC-F 125 L-362
KSC-F 160 L-480
For further data, please see the current catalogue >> Schunk stationary Workholding <<

2.2 Reasonably foreseeable misapplication

Any application that is not in accordance with the "Intended use" or exceeds such
intended use is considered not in accordance with the regulations, and is forbidden.
Any other use of the device is subject to confirmation from the manufacturer.
Examples of forseeable misapplication:
 Clamping device used on rotating systems.
 Clamping widely protruding workpieces.
 Clamping workpieces with a weight of over 20 kg in vertical position without an additional
safeguard to prevent the workpiece falling out.
schunk.com
max. torque
50 Nm
90 Nm
120 Nm
Anzugs-Drehmoment / Spannkraft
Nm
100
80
60
40
20
0
20 30 kN
0
Standard without system jaws:
Standard without system jaws:
Standard without system jaws:
XND.00030.002_B – 10/2018
max. clamping force
25 kN
40 kN
50 kN
KSC-F 125
10 20 30 40
5.0 kg
15.0 kg
28.5 kg
KSC-F 160
Anzugs-Drehmoment / Spannkraft
Nm
140
120
100
80
60
40
20
0
0 10 20
50 kN
30 40 50 60
kN
23