Replacing The V-Belt - Bomag BVP 10/30 Operating Instruction

8.8.6 Replacing the V-belt

1 2
Fig. 110
1 2 3
Fig. 111
1 3
Fig. 112
Protective equipment:
1. Park the machine safely
in secured condition' on page 74.
2. Let the machine and the engine cool down to ambient tem-
perature.
3. Unscrew the fastening screws (2) and remove the V-belt
guard (1).
B-834-0137
4. Loosen the fastening screws (3) on both sides.
5. Pull the engine carrier (1) forward, remove and replace the V-
belt (2).
B-834-0139
6. Install the new V-belt and pull the engine carrier back.
7. Tighten the fastening screws (3) on both sides.
B-834-0140
BVP 10/30
Maintenance – Annually
n Working clothes
n Safety shoes
n Protective gloves
Ä Chapter 6.6 'Parking the machine
103