Loading With Lifting Tackle - Bomag BVP 10/30 Operating Instruction

Loading / transporting the machine – Loading with lifting tackle

7.2 Loading with lifting tackle

Fig. 72
Use lifting tackle only in the prescribed direction of load application.
Lifting tackle must not be damaged by machine components.
Use only lifting tackle with sufficient load bearing capacity for the
weight to be loaded. Minimum load bearing capacity of lifting
tackle: see operating weight
on page 11.
Protective equipment: n
n
n
WARNING!
Danger of burning on hot components!
– Wear your personal protective equipment (pro-
tective gloves, protective clothing).
– Avoid touching hot components.
1. Park the machine in secured condition
'Parking the machine in secured condition' on page 74.
2. Let the machine and the engine cool down to ambient tem-
perature.
3. Check the lifting point including fastening elements for
damage before lifting the machine.
ð Do not use damaged or in any other way impaired lifting
points.
4. Attach lifting tackle to the lifting point.
5. When lifting the machine, avoid uncontrolled movements of
the load. If necessary, hold the load with guide ropes.
6.
DANGER!
Danger to life caused by suspended
loads!
– Do not step or stand under suspended
loads.
Lift the machine carefully and set it down on the transport
vehicle.
BVP 10/30
Ä Chapter 2 'Technical data'
Working clothes
Protective gloves
Safety shoes
Ä Chapter 6.6
79