Cleaning, Checking The Spark Plug, Replacing If Necessary - Bomag BVP 10/30 Operating Instruction

Maintenance – As required
Fig. 116
1 Starter switch
2 Recoil starter
3 Carburettor
4 Air filter
5 Air intake area

8.9.3 Cleaning, checking the spark plug, replacing if necessary

108
3.
NOTICE!
Components can be damaged by water
entering into the system!
– Do not direct the water jet directly into the
air filter, carburettor, recoil starter, air
intake or starter switch.
Clean the machine with a water jet.
4. Run the engine warm for a while to avoid corrosion.
NOTICE!
Danger of engine damage!
– Do not use spark plugs with incorrect heat
value.
BVP 10/30