Bomag BVP 10/30 Operating Instruction page 101

Maintenance – Annually
Fig. 113
1 2
Fig. 114
8.8.6.1 Checking the frequency of the base plate
104
8. Check tension of V-belt, tighten if necessary.
ð Compression measurement: approx. 5 mm (0.2 in).
B-834-0138
9. Attach the V-belt guard (1) with the fastening screws (2).
10. Check the V-belt tension again after 25 operating hours,
tighten if necessary.
B-834-0137
Keep feet and hands clear of the vibrating base plate.
CAUTION!
Danger of injury caused by uncontrolled
machine movement!
– Always hold on to a running machine.
– Always keep an eye on a running machine.
Protective equipment:
Special tool:
1. Park the machine on a rubber mat.
2. Start the engine
on page 67.
3. Run the machine at maximum speed for one minute.
4. Check the base plate's frequency with a suitable measuring
instrument (e.g. Sirometer).
ð Nominal value:
5. Park the machine safely
in secured condition' on page 74.
BVP 10/30
n Working clothes
n Hearing protection
Safety shoes
n
n Sirometer
Ä Chapter 6.4 'Starting the engine'
Ä Chapter 2 'Technical data' on page 11
Ä Chapter 6.6 'Parking the machine