Console Port Pinouts (Applies Only To Dt Models); Product Specifications; Nport 5600-8-Dt - Moxa Technologies NPort 5600-8-DT Series User Manual

NPort 5600-8-DT/DTL Series
The NPort 5610-8-DT-J only supports RS-232 signals.

Console Port Pinouts (applies only to DT models)

RJ45 Connector

Product Specifications

NPort 5600-8-DT

Ethernet Interface
Number of Ports: 2 (1 IP)
Speed: 10/100 Mbps, auto MDI/MDIX
Connector: 8-pin RJ45
Magnetic Isolation Protection: 1.5 KV built-in
Serial Interface
Number of Ports: 8
Serial Standards:
NPort 5610-8-DT: RS-232
NPort 5650-8-DT: RS-232/422/485
Connector:
NPort 5610-8-DT/5650-8-DT/5650I-8-DT: DB9 male
NPort 5610-8-DT-J/5650-8-DT-J: RJ45 (8 pins)
Serial Line Protection:
15 KV ESD protection for all signals
2 KV isolation protection (NPort 5650I-8-DT only)
RS-485 Data Direction Control: ADDC® (automatic data direction control)
Pull High/Low Resistor for RS-485: 1 KΩ, 150 KΩ
Terminator for RS-485: 120 Ω
Serial Communication Parameters
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: DSR/DTR and RTS/CTS (RS-232 only), XON/XOFF
Baudrate: 50 bps to 921.6 Kbps
Serial Signals
RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422: Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w: Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w: Data+, Data-, GND
Software
www.ipc2u.ru
8 DTR –
Pin RS-232
1 DSR
2 RTS
3 GND
4 TxD
5 RxD
6 DCD
7 CTS
8 DTR
2-7
Overview of Hardware
–
www.moxa.pro