• NPort 5650I-8-DT-T: 8 ports, RS-232/422/485, DB9, optical isolation, -40 to 75°C operating temperature Package Checklist The NPort 5600-8-DT package should contain the following items: • 1 x NPort 5600-8-DT 8-port serial device server • 1 x 100 to 240 VAC power adapter (excluding –T models) •...
Hardware Introduction Top and Rear View Front View (NPort 5610-8-DT, NPort 5610-8-DT-T, NPort 5650- 8-DT, NPort 5650-8-DT-T, NPort 5650I-8-DT, NPort 5650I-8-DT- Front View (NPort 5610-8-DT-J, 5650-8-DT-J) Reset Button The reset button is used to load the factory defaults. Use a pointed object to hold the reset button down for five seconds.
No data is flowing to or from the serial port. Hardware Installation STEP 1: After removing the NPort 5600-8-DT from the box, place it on a desktop or other horizontal surface. Connect the 12-48 VDC power adaptor to the NPort 5600-8-DT’s power input when using an AC power source, or connect the NPort 5600-8-DT’s terminal block directly to a...
Screws should be less than 6.0 mm in head diameter, and less than 3.5 mm in shaft diameter. DIN Rail Mounting DIN-rail attachments can be purchased separately to attach the product to a DIN-rail. The DIN-rail attachments should be oriented with the metal springs on top.
NOTE For security-related configuration, please refer to the manual’s Cybersecurity Considerations chapter. NOTE For the NPort with DB Male serial ports, you may refer to the DB9 Male Ports pin assignment section to loop back pin 2 and pin 3 for the RS-232 interface to carry out a self test on the device.