Table of Contents
Advertisement
8.
Using the stay rod nut adjusting tool, carefully lower the top plate adjusting nuts until the top
plate sits at the required height, making sure that the top sits level and matches the height of
the AGA DC3. (See Fig. 1.19).
Fig. 1.19
9.
Fit the handrail bracket over the fixing stud located on the top plate. Lock into position by
tightening the grub screw nearest the appliance. (See Fig. 1.20).
Fig. 1.20
18
DESN 516555
DESN 516883
Advertisement
Table of Contents
