Table of Contents
Advertisement
Description of key
No.
Key
Name
Function of overview
Denotes the code reading status or the charging
Status indicator
status with color or flashing state of light.
Speaker
Sound comes out of it.
Receives speaker's voice when talking. This function
Receiver
is integrated in the WWAN model.
Mounted on the LCD screen side for capturing the
Front camera
image
Power key
Powers ON/OFF
Left trigger key
Reads codes.
Right trigger key
[M1] to [M4] keys can be used in place of [SF] key,
Magic key [M1]
[ENT] key, [Back light] key, [MENU] key or [BS/C]
key depending on settings.
Strings can be assigned with the user program.
Magic key [M2]
[M1] key can operate as MENU key by holding down
for more than one second, and displays the following
screens.
Magic key [M3]
- Beeper volume level
- Vibrator
- Brightness of screen
Magic key [M4]
- Power saving
Picks up voice when talking. This function is
Microphone
integrated in the WWAN model.
Makes data communication using the
Interface
Communication Unit and charges.
connector
Keep this clean so as not to cause a contact failure.
To be fixed so that a battery cover will not be opened
Battery cover lock
unnecessarily. Press and then slide it.
Attach the hand strap referring to 1.3 Attaching the
Hand strap
Hand Strap so as not to drop the BHT during the
operation.
To be opened when replacing the main battery and
Battery cover
SIM and microSD cards.
Rear camera
Captures the image.
Barcode reading
Contains a camera for reading codes. Keep it always
window
clean so as not to cause any scratches.
To be opened when using a round plug for a headset.
Audio plug cover
When not in use, be sure to close it to avoid the
entry of water drop.
Barcode / 2D Code Handy Terminal
11
Advertisement
Table of Contents
