Mechanical; Electrical; Battery; Environmental - Welch Allyn Spot Vital Signs LXi Directions For Use Manual

Directions for Use

Mechanical

Dimensions
Weight
Mounting
Portability

Electrical

Power Requirements

Battery

Sealed lead acid, with external charger.
The Spot LXi battery is 90 to 100% charged after 6 hours of charging. The rechargeable
batteries in the Braun ThermoScan PRO 4000 thermometer requires an additional 1 hour
to charge. The battery automatically charges when Spot LXi is powered through the AC
power transformer. An operator can use the device while the battery is charging; however,
the battery charges faster when the instrument is not in operation.
The external printer has a Ni-Mh battery that includes a separate external printer charger
(713703 or BC1300M). Charge the external printer battery 6 hours before initial use.

Environmental

Operating Temperature
Storage/Transport Temperature
Relative Humidity
Operating Altitude

Patents

The Spot LXi is covered under the following patents: 6,827 ,488; 6,971,790; and other
patents pending.
WARNING This device is not suitable for use in the presence of a flammable
anesthetic mixture with air or oxygen or nitrous oxide. An explosion may result.
May be hand-carried when held by the rear handle
Patient-rated transformer is connected to AC mains:
100-240V, 50-60Hz, 0.4A or internal power: 6Vdc, 6Ah
Device with SureTemp Plus: -13 to 131F (-25 to 55C)
Device with Braun ThermoScan PRO 4000: -4 to 122F (-20 to 50C)
Specifications
Height: 10.63 " (27 cm)
Length/Braun: 8" (20.32 cm)
Length/SureTemp Plus: 7.5" (19 cm)
Depth: 5.25" (13.34 cm)
7.5 lbs (3.4 kg)
Self-supporting on rubber feet
Custom mobile stand
Custom wall mount
50° to 104° F (10° to 40° C)
15 to 95% (non-condensing)
-557 to 16,000 ft. (-170 to 4877 m)
59