Advertisement
125
LAMP
BATT.
CHARGE
TEST
FAULT
Lamp fault
indication LED
Battery
charge
indication
LED
CHARGE
Figure 4
1. To replace the lens , first be sure that the luminaire in not connected in the mains power supply
and the battery is not connected.
2. Use a flatblade screwdriver to pry open the lens retaining cover.
3. Remove the placed lens and insert the newone taking care the two alignment pins on the lens are
inserted in the holes on the PCB. Be carefull not to touch the LED with your hand.
Manufacturer
Model Number
Voltage Range
Nominal Power
Connections
Temperature (tc)
The light source contained in this luminaire shall only be replaced by the manufacturer, or his
agent, or a similar qualified person.
NOTE! The light source is non-user replaceable.
Page 5 from 6
96
Battery
fault
indication
LED
LAMP
BATT.
TEST
FAULT
Test
button
LENS REPLACEMENT
CHARGE
LED MODULE CHARACTERISTICS
GR-220/DUO/M
fixed connection between main pcb and led module
CAUTION : Do not view directly with bare eyes
62
Corridor
lighting
ATTENTION!!!
During installation follow this light direction.
Open
area
lighting
LAMP
BATT.
TEST
FAULT
Olympia Electronics S.A.
0606185
3-3,2V DC
1,3W
6 ° 0 C max. across the board
GR-220/DUO/M
LAMP
BATT.
CHARGE
TEST
FAULT
GR-220/DUO/M
LAMP
BATT.
CHARGE
TEST
FAULT
GR-221/DUO/M
923221000_09_001
Advertisement
