Preparing Chassis For Rack Rail Mounting - Racal Instruments 1269 User Manual

ITEM
1 Rack Rail Adapter
5 Rack Mount Ear - Right Side
7 Rack Mount Ear - Left Side
9 Retainer Nut
11 Phillips Panhead #10-32 x .750
13 Phillips Panhead #10-32 x .500
15 Phillips Panhead #8-32 x .625 Sems Assy
17 1.75" Diameter Flat Washer
19 Rack Mount Ear Handle
21 Instruction Sheet
Preparing Chassis
for Rack Rail
Mounting
Configuring The 1269 2-14
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Table 2-2 Option 04 Parts List
DESCRIPTION
(Refer to Figure 2-8)
1. Remove feet and two socket button head screws from
bottom cover.
2. Place two washers (Item 17) over screw holes as shown.
3. Lay rack mount ear (Item 5) on bottom cover, Select hole
that best serves your application. The one shown will make
the chassis flush with the front of rack. The other holes
move the chassis forward in ½ inch increments.
4.
Position rack rail adapter (Item 1) over rack mount ear (Item
5) and washers (Item 17).
5.
Secure rack rail and rack mount ear to bottom cover with
four 8-32 x .625 phillips screw/washer (sems) assembly
(Item 15).
6. Repeat procedure for top cover with installation of rack rail
adapter and rack mount ear (Item 7).
7. 7. Attach handles (Item 19) to rack mount ears (Items 5
and 7) with two each Phillips 10-32 x .500 screws (Item 13).
1269 User Manual
QTY PART NUMBER
2 456528
1 456529
1 456530
4 610920
4 615093
4 615590
8 616262
4 617170
2 921275
1 980801