Preparing Chassis For Slides; Figure 2-4A Slide Rack Mounting Bottom Cover - Racal Instruments 1269 User Manual

1269 User Manual
Preparing Chassis
for Slides
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Figure 2-4a Slide Rack Mounting Bottom Cover

(Refer to Figure 2-4a)
1. Remove feet and two socket button head screws from
bottom cover.
2. Place four washers (Item 21) over four screw holes as
shown.
3.
Lay rack mount ear (Item 5) on bottom cover. Select hole
that best serves your application. The one shown will
make the chassis flush with the front of rack. The other
holes move the chassis forward in ½ inch increments.
Configuring The 1269 2-7