Advertisement
IMPORTANT:
•
Use only supported Aruba transceivers.
•
The 8325 switch front panel transceiver slots support SFP+, SFP28, QSFP+, and QSFP28 transceivers.
•
For more information, see the latest version of the following two guides. (Use the URL and instructions
included under All product documentation on page 1.)
◦
Aruba 8325 Switches Installation and Getting Started Guide
◦
ArubaOS-Switch and ArubaOS-CX Transceiver Guide
Power cords
Aruba includes the power cord intended for use with your Aruba switch. Different countries/regions may require different
power cords. For a list of the power cords that apply to your 8325 switch, see the section that lists power cords in the latest
edition of the Aruba 8325 Switches Installation and Getting Started Guide. To access this guide online:
1. Go to http://www.hpe.com/networking/ResourceFinder.
2. For the switch model, filter on 8325.
3. For the information type, filter on Installation.
4. Scroll down to the Installation list and select the latest Aruba 8325 Switches Installation and Getting Started Guide.
CAUTION: Only Aruba-approved power cords may be used with Aruba devices. Use the above four steps to
see the power cord documentation provided in the latest version of the Aruba 8325 Switches Installation and
Getting Started Guide. Lost or damaged power cords must be replaced only with Aruba-approved power
cords. If your installation requires a different power cord than the one supplied with the switch and/or power
supply, use a power cord that displays the mark of the safety agency that defines the regulations for power
cords in your country or region. The mark is your assurance that the power cord can be used safely with the
switch and power supply.
WARNING: Do not use a damaged or nonrecommended power cord with your switch. Using such power
cords voids the switch and power supply warranty. It can also cause serious electrical problems, including
injury or death to personnel, and damage to the switch and other property. If you cannot verify that you have a
power cord approved for use with your switch model, contact your authorized Aruba dealer or sales
representative for assistance.
Aruba 8325 Switch Safety and Regulatory Information
NOTE: For important safety, environmental, and regulatory information, see Safety and Compliance
Information for Server, Storage, Power, Networking, and Rack Products, available at http://www.hpe.com/
support/Safety-Compliance-EnterpriseProducts.
Table 1: Electrical information for 8325 switch power supplies
Electrical
•
AC voltage:
•
Maximum current:
•
Frequency range:
Switches: JL624A, JL625A, JL626A, JL627A
Per JL632A and JL633A power supplies:
100V–240V
10 A
50–60 Hz
Page 3
Advertisement
