Table of Contents
Advertisement
Chapter 1. Introduction
1.1 Revisions in this Manual
Rev
Date
Description
Mar
•
F
In Section 5.1.3, added Fault Status Data.
2019
Oct
•
E
Added note 3.2.2 concerning PNC001 Critical Network Ports feature with GCGs.
2018
Mar
•
D
Added compatibility with CPE302.
2018
•
Added support for Field Control Bus Interface Unit.
•
Added Outputs at Startup hardware configuration parameter.
Dec
C
•
Added Enable/Disable Outputs and Switch BSM COMMREQs.
2017
•
Documented GCG001 Units deployed in Genius Hot Standby Dual Bus Redundancy
(Section 3.2.5).
•
Added support for VersaMax Genius Network Interface (GNIU)
Aug
•
B
Added support for IC660BSS101 isolated I/O block
2016
•
Added support for additional Genius baud rates
•
Behavior of GCG001 with respect to input references associated with a faulted block
is described in Section 1.10, with workaround in Section 4.1.4.
•
Mar
Correction to Figure 22: Genius Hot Standby Redundancy to indicate CPU type is CRU
A
2015
and RMX modules are required.
•
Clear All Faults can now be dispatched to all blocks on the bus in a single command.
See Section 6.4.6.
Jun
-
Initial release
2014
2
PACSystems RX3i Genius Communications Gateway
GFK-2892F
Advertisement
Table of Contents
