Control Panel Section - Sony BRC-X400 Operating Instructions Manual

Control Panel Section

Click to hide the detailed setting screen. Click
it again to show the screen.
Information panel
Current date & time
It displays the current date and time set on the
camera.
View panel
The screen mode, view size of the image, and
image codec can be changed. Still images and
videos can be stored (storing video can also be
stopped) and audio output volume can be
adjusted.
Screen mode
Select the display mode of the live viewer from
[Window] or [Full Screen].
View size
Select the image view size on the monitor
screen.
Select [×1/4] to display in one-quarter of the
image size.
Select [×1/2] to display in one-half of the image
size.
Select [×1] to display the image size selected in
[Size] (page 68) of the Video menu.
Select [Full] to display images according to the
display size.
Select [Fit] to display images with fixed aspect
ratio according to the display size.
Image codec
Select the video mode of the image displayed on
the monitor screen from [Image 1], [Image 2], or
[Image 3].
You can select [Image 2] or [Image 3] when the
codec setting is set to other than Off.
Still image capture
Click to capture a still image shot by the camera
and to store it in the computer.
Start storing Video/
Click to start or stop storing the video.
Notes
• While One Shot JPEG image is displayed, you
cannot store the video. You cannot start/stop
storing video.
• Still images cannot be captured and videos
cannot be stored if the protection mode is
enabled in Internet Options > Security
properties in Control Panel of Windows.
Volume control
This is displayed when you check [Enable] in the
Audio tab of the Audio menu.
Use the slide bar to adjust the volume for audio
output.
When you click
and audio does not output from the speaker.
To output audio again, click
Notes
• While One Shot JPEG image is displayed, audio
is not output. Volume control is not displayed.
• When you open the live screen, audio output is
stopped in the default setting. To output audio,
click before use.
Camera panel
By using the control panel, you can operate the
pan/tilt, moving to the home position, zoom,
and focus of the camera for the monitor image
currently displayed.
Pan/Tilt control
Click the arrow button of the direction you want
to turn the camera. To turn the camera
continuously, click and hold the arrow button.
Click to return to the front.
Zoom control
Click to zoom out and click
Zoom continues while the button is being
clicked.
57
Stop storing Video
, the icon is changed to
.
to zoom in.