Using Ndi|Hx - Sony BRC-X400 Operating Instructions Manual

RTSP time out
Specify the time for the time out by the Keep-Alive
command from RTSP streaming. You can set the
time out from [0] second to [600] seconds.
At the [0] setting, time out of the Keep-Alive
command is not available.
Examples of RTSP streaming acquisition
This camera is compatible with RTSP as the
streaming protocol. Up to three streams are
available for the camera. The URL of each stream
is as follows.
• rtsp://<IP>:<Port>/video1 (Image 1)
• rtsp://<IP>:<Port>/video2 (Image 2)
• rtsp://<IP>:<Port>/video3 (Image 3)
<IP>: IP address of the camera
<Port>: RTSP port number
Note
Playing on media players other than web
browsers is not guaranteed.

Using NDI|HX

To use NDI|HX, you are required to purchase the
license key.
Purchasing the license key
You can purchase the license key from the
following URL of NewTek, Inc.
https://www.ndicentral.com/store/
Notes
• Download and install the latest driver of
NDI|HX.
• For details on settings and operations for
NDI|HX, refer to the instructions of NewTek
products.
Services and software provided by other
companies
• Separate terms and conditions of use may be
applied.
• Provision of services and software updates
may be interrupted or terminated without
notice.
• Services and software content are subject to
change without notice.
• Separate registration and/or payment may
be required.
Please note that Sony Corporation is not
responsible for any claim, from customers or
third parties, arising from any use of services
and software provided by other companies.
85