Upnp Tab; Cns Tab (Brc-X400/X401); Setting The Security - Security Menu; Administrator And User - Sony BRC-X400 Operating Instructions Manual
Color video camera
Hide thumbs
Also See for BRC-X400:
- Command list (41 pages) ,
- Manual (15 pages) ,
- Technical manual (15 pages)
Table of Contents
Advertisement
Move up
Increases the priority of the rule.
Select a rule from the QoS table to prioritize and click
[Move up].
Move down
Decreases the priority of the rule.
Select a rule from the QoS table to lower its priority
and click [Move down].
UPnP tab
Set UPnP (Universal Plug and Play).
Discovery
Enable
When this function is enabled, you can search the
camera by using UPnP. To disable this function, clear
the checkbox.
CNS tab (BRC-X400/X401)
The camera can be connected to an optional
remote control panel (RCP) or master setup unit
(MSU) for operation. For details about supported
devices, contact your Sony sales representative.
Configure the following settings on the CNS tab
to connect with an RCP/MSU.
Camera network system
Mode
[Bridge]: Set to Bridge mode to connect directly
with an RCP on a LAN.
[MCS]: Set to MCS mode when building a multi-
camera system on a LAN.
Master IP address
Set the IP address of the master device when
building a multi-camera system on a LAN.
Camera No.
Set the camera number when building a multi-
camera system on a LAN. Set so that the number is
not duplicated within the system.
Notes
• Configure settings on the RCP/MSU side as
required.
• An MSU is required in a multi-camera system.
• If there are multiple MSUs, set one MSU as the
master, and set all other MSUs as clients.
Setting the Security
— Security Menu
When you click
menu, the Security menu appears.
The Security menu consists of the [User], [Access
limit], [SSL], [802.1X], [Referer check] and [Brute
force attack protection] tabs.
Administrator and User
This camera identifies those who log in as the
"Administrator" or "User".
The "Administrator" can use all the functions of
this camera, including camera settings.
"User" can select user sections specified as
available functions (access rights) in the [Viewer
mode]. User section includes [Administrator]
which can set all the functions as well as [Full]
and [Light].
Each type of user can use the corresponding
functions below.
Function
Monitor a live
image
View the date and
time
Control the image
view size
Save a still image
and movie in the
computer
Perform the pan/
tilt/zoom/focus
operation
Receive audio
Select the codec
mode
Perform the tally
control
Perform the preset
position setting
and recalling
Control the setting
menu
Usable function, – Not usable function
74
in the Administrator
User
Administrator
Full
–
Light
–
–
–
–
Advertisement
Table of Contents
