Preset Recall - Sony BRC-X400 Operating Instructions Manual

Setting range of LEFT/RIGHT
CENTER (±0°)
–170°
Setting range of DOWN/UP
±0°
–20°
Notes
• Configure [PAN LIMIT] and [TILT LIMIT] before
storing the camera position in a preset
memory. If the camera position is out of the
range of the [PAN LIMIT] and [TILT LIMIT]
settings, you cannot store the camera position
in the preset memory.
• When you change the [IMG FLIP] setting in the
SYSTEM menu, the [PAN LIMIT] and [TILT LIMIT]
settings are reset to the factory settings.
RAMP CURVE (Pan-Tilt - Ramp curve)
Acceleration/deceleration curve for pan and tilt.
Note
This is fixed to [MODE1] for this camera.
+170°
+90°
PAN TILT SLOW (Pan-Tilt - Slow Pan-Tilt
mode)
You can select slow speed panning/tilting.
[OFF]: The camera pans/tilts at the standard
speed.
[ON]: The camera pans/tilt speed is slower.

PRESET RECALL

You can select preset recall settings.
RECALL SPEED (Preset - Speed select)
You can select preset recall speed.
[COMPATIBLE]: Work differently depending on
the commands for preset recall.
• For VISCA command: Pan/tilt work with
the speed set by each preset number.
• For CGI: Pan/tilt work with the speed
specified by the CGI command of preset
recall.
[SEPARATE]: Pan/tilt work with the speed set by
each preset number.
[COMMON]: Pan/tilt work with the common
speed to all preset numbers.
COMMON SPEED (Preset - Common
speed)
This is enabled when [RECALL SPEED] is
[COMMON]. Pan/tilt speed for preset recall,
which is common to all preset numbers.
PICT FREEZE PRESET (Preset - Pict freeze
preset)
You can select output image for preset recall.
[OFF]: Output image directly from the camera.
[ON]: Output frozen image during preset
recalling.
42