Sony BRC-X400 Operating Instructions Manual page 82

[Digital]: An image can be zoomed up to 20× optical
zoom and 12× digital zoom (including Clear
Image Zoom) with up to a total of 240× zoom.
Focus
This is the setting related to the focus.
Focus mode (FOCUS - MODE)
Select the focus mode.
[Auto]: The focus is automatically adjusted.
[Manual]: The focus can be adjusted by using the
, , and
the control panel displayed in the main
viewer.
Focus near limit
Set the range at which to automatically focus. If a
subject is nearer than the set range, it will not be
focused.
Pan-Tilt
This is the setting related to the pan/tilt.
Pan-Tilt limit (PAN TILT - PAN LIMIT, TILT LIMIT)
Select the checkbox to limit the pan/tilt range. You
can select the following values.
Note
Switching Image flip on/off turns Pan-Tilt limit
setting to the factory setting. Set the Image flip
function in accordance with the installation
condition of the camera and select the value.
Left, Right (PAN TILT - LEFT, RIGHT)
Select the panning range.
[Left]: –170° to +169°, adjustable in 1° increment.
[Right]: –169° to +170°, adjustable in 1° increment.
Down, Up (PAN TILT - DOWN, UP)
Select the tilting range.
[Up]: –19° to +90° (Image flip: OFF)
–89° to +20° (Image flip: ON), adjustable in 1°
increment.
[Down]: –20° to +89° (Image flip: OFF)
–90° to +19° (Image flip: ON), adjustable in 1°
increment.
Setting the range of the Up/Down movement
(Image flip: OFF)
90°
0°
–20°
buttons of
(Image flip: ON)
20°
0°
–90°
82
Ramp curve (PAN TILT - RAMP CURVE)
Set the acceleration/deceleration curve for pan/tilt.
Note
It is fixed to [Mode 1] on this camera.
Slow Pan-Tilt mode (PAN TILT - PAN TILT SLOW)
Select the checkbox to set [Pan-Tilt] to [Slow Pan-Tilt
mode].
Preset
This is the setting related to the preset.
Speed select (PRESET RECALL - RECALL SPEED)
Select the preset recall speed.
[Compatible]: Work differently depending on the
commands for preset recall.
For VISCA command: Pan/tilt work with the
speed set by each preset number.
For CGI command: Pan/tilt work with the
speed specified by the CGI command of
preset recall.
[Separate]: Pan/tilt work with the speed set by each
preset number.
[Common]: Pan/tilt work with the common speed
to all preset numbers.
Common speed (PRESET RECALL - COMMON
SPEED)
This is enabled when [Speed select] is [Common].
Pan/tilt speed for preset recall, which is common to
all preset numbers.
Pict freeze preset (PRESET RECALL - PICT FREEZE
PRESET)
Select output image state for preset recall.
When the checkbox is selected, frozen images are
output during preset recalling.
Preset mode (SYSTEM - PRESET MODE) (BRC-
X400/X401)
Set preset mode.
[Mode 1]: Recall all saved settings when recalling a
preset.
[Mode 2]: Recall only the pan, tilt, zoom, and focus
positions when recalling a preset.
PTZ mode
Set the pan/tilt control mode using the 8-
direction arrow buttons (page 57) and the zoom
control mode using the
57). Select [Normal] or [Step].
PTZ mode
[Normal]: When you click the mouse, the camera
starts panning, tilting or zooming, and the
operation continues while you hold down the
mouse. To stop the operation, release the
mouse.
/ buttons (page