11. Maintenance
Sequence of the maintenance work on the button trap:
Remove strainer insert
Clean strainer insert
Clean additional round sieve
Reinsert sieve cartridge
Attention:
Attention:
Insert the lint filter basket and make sure that it sits firmly in place
Clean the cover seal
Firmly close the cover of the common maintenance opening
11.5.2 Lint Post-Filter
Check the post-filter daily:
Open the cover on the airshaft
Remove the post-filter, suction it off, or, alternatively, clean it with a brush (wash if needed).
Replace the post-filter.
Close the cover
68
Never work without a strainer insert - the pump could
be damaged by foreign bodies!
Perform maintenance only when the machine has
been turned off and after the drying has finished.
11.
P21/P26/P30