Slimsorba Adsorption Unit - BÖWE P26 Instruction Manual

7. Functional Units

7.19 Slimsorba Adsorption Unit

(Optional equipment)
General Information
The Slimsorba is a multiple-cycle adsorption unit for reducing the perc solvent residue in the cage at
the end of the cycle.
The Slimsorba is integrated into the machine. All functional sequences run completely automatically
over the computer control of the drycleaning machine.
The carbon unit has been dimensioned so that it can adsorb approx. one week long during normal
single shift operation.
Special maintenance programs are available for the Slimsorba; they allow you to perform desorption
of the activated carbon outside of the cleaning cycles. If you want, you can have the system provide
you with a maintenance message.
Desorption is performed in an environmentally acceptable way with hot air. It does not result in any
process water that needs to be disposed of.
The Slimsorba is heated with steam.
The cage venting of the drycleaning machine runs over the Slimsorba when the loading door is open.
A special cooling system always keeps the carbon's temperature within the optimum range for good
adsorption capabilities. (optional)
Attention: There is a risk of burns on parts that are not insulated.
The main components of the Slimsorba are:
- Carbon container
- Heater battery
- Air filter
- Fan
- Sensors
- Connecting pipes
with a filling of absorbing carbon and an internal cooling coil (optional with
additional cooling coil)
Note: You must fill in activated carbon when commissioning the machine
for hot air desorption
lint filter
for moving the air flow
for temperature monitoring
to the drycleaning machine
40
7.
7.20
P21/P26/P30