Specifications; Packing List - Ego Power+ STX3800 Operator's Manual

SPECIFICATIONS

Voltage
No-load Speed
Cutting Mechanism
Cutting Line Type
Cutting Width
Recommended Operating
Temperature
Recommended Storage Temperature -20°C-70°C
Weight (without battery pack)
Guaranteed sound power level

PACKING LIST

PART NAME
Line Trimmer
Guard assembly
Loop handle assembly
Safety barrier bar
Locking pole for safety barrier bar
Screw
Combi-wrench
Allen key
Operator's manual
Out flange
Nut
DESCRIPTION
KNOW YOUR LINE TRIMMER (Fig. A)
1. Socket
2. Lock-off Lever
3. Threshold Ring
4. Loop handle
5. Trimmer Line
6. Guard Assembly
10
56 VOLT LITHIUM-ION CORDLESS LINE TRIMMER — STX3800
7.
8. Trigger
9. Rear handle
56 V
10. Trimmer Head(Bump head)
Up to 5800 /min
11. Release tab
Bump Head
12. Line-cutting blade
2.4mm nylon
13. Safety barrier bar (For brushcutter head only)
twist line
14. Locking pole for safety barrier bar (For brushcutter
38 cm
0°C-40°C
15. Out flange (For brushcutter head only)
16. Nut (For brushcutter head only)
17. Combi-wrench
5.8 kg
18. Allen key
70dB(A)
ASSEMBLY
do not operate this product until the parts are
replaced. Use of this product with damaged or missing
QUANTITY
parts could result in serious personal injury.
1
1
or create accessories not recommended for use with
this line trimmer. Any such alteration or modification
1
is misuse and could result in a hazardous condition
1
leading to possible serious personal injury.
1
2
could cause serious personal injury, always unplug the
battery connector from the socket when assembling
1
parts.
1
1
brushcutter head, the safety barrier bar should be
mounted.
1
1 MOUNTING THE GUARD
or replacing the guard. Take care of the blade on the
guard and protect your hand from cutting.
guard firmly in place. The guard must always be on
the tool to protect the user! When the guard is fixed,
never attempt to remove or adjust the guard, if a
replacement is needed, it should be performed by a
qualified service technician!
Shaft
head only)
WARNING: If any parts are damaged or missing,
WARNING: Do not attempt to modify this product
WARNING: To prevent accidental starting that
WARNING: When the tool is equipped with
WARNING: Always wear gloves when mounting
WARNING: Never operate the tool without the