56 volt lithium-ion cordless line trimmer (272 pages)
Summary of Contents for Ego Power+ STA1600
Page 1
LINE TRIMMER ATTACHMENT OPERATOR'S MANUAL 56 VOLT LITHIUM-ION LINE TRIMMER ATTACHMENT MODEL NUMBER STA1600 WARNING: To reduce the risk of injury, the user must read and understand the Operator’s Manual before using this product. Save these instructions for future reference. MNL_EGO_STA1600_AV01.01_230413...
Page 2
1. End Cap 2. Line trimmer Shaft 3. Line-Loading Button 8. Guard 4. Cutting Line 6. Release Tab 7. Line-cutting Blade 9. Hex Wrench 5. Trimmer Head (Bump Head)
GENERAL MACHINE SAFETY WARNINGS WARNING: Read all safety warnings, instructions, illustrations and specifications provided with this machine. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. 56 VOLT LITHIUM-ION LINE TRIMMER ATTACHMENT — STA1600...
A moment untrained users. of inattention while operating machines may result in ◾ Maintain machines and accessories. Check for serious personal injury. misalignment or binding of moving parts, breakage 56 VOLT LITHIUM-ION LINE TRIMMER ATTACHMENT — STA1600...
Page 7
Do not expose a battery pack or tool to fire machine. Thrown debris can result in serious personal or excessive temperature. Exposure to fire or injury. temperature above 130°C may cause explosion. 56 VOLT LITHIUM-ION LINE TRIMMER ATTACHMENT — STA1600...
Storage Temperature -20°C-70°C machine, make sure the switch is off and the battery pack is removed. Unexpected starting of the machine while clearing jammed material or servicing may result in serious personal injury. 56 VOLT LITHIUM-ION LINE TRIMMER ATTACHMENT — STA1600...
(Fig. D). Make sure the guard is fixed according to Fig. C & D, any reverse fixing will cause great danger! 56 VOLT LITHIUM-ION LINE TRIMMER ATTACHMENT — STA1600...
2. Press the release tabs on the trimmer head and that specified may cause the line trimmer to overheat or remove the lower cover assembly of the trimmer become damaged. head by pulling it straight out (Fig. H). 56 VOLT LITHIUM-ION LINE TRIMMER ATTACHMENT — STA1600...
2. Align the flat slot in the upper cover with the flat in lubricated periodically with gear grease. Check the motor shaft and mount the upper cover into place gear case grease level about every 50 hours of (Fig. N). 56 VOLT LITHIUM-ION LINE TRIMMER ATTACHMENT — STA1600...
5. Carefully file the cutting edges of the blade with afine-tooth file or sharpening stone, maintaining the original cutting edge angle. 6. Replace the blade on the guard and secure it in place with the two screws. 56 VOLT LITHIUM-ION LINE TRIMMER ATTACHMENT — STA1600...
◾ ◾ The battery pack is Re-install the battery pack. disconnected from the tool. ◾ ◾ The battery pack is depleted. Charge the battery pack with EGO chargers listed in this manual. 56 VOLT LITHIUM-ION LINE TRIMMER ATTACHMENT — STA1600...
Page 14
56 VOLT LITHIUM-ION LINE TRIMMER ATTACHMENT — STA1600...
Need help?
Do you have a question about the STA1600 and is the answer not in the manual?
Questions and answers