Operation; Maintenance - Milton Roy MAXROY Series Actuator Capacity Control Manual

5 OPERATION.

Never leave the cover open in order to avoid any risk of water inlet.
In case of use in explosive dust atmosphere, check that the cover
tightness O-rings are intact and make sure not to damage the seals
while closing the cover (see maintenance kit table 6)

6 MAINTENANCE.

Regularly check that the actuator explosion-proof enclosure has not
been degraded by a mechanical shock or any other type of
aggression.
Ensure a regular cleaning of the product housing to avoid dust build-
up.
Covers opening
!
Do not open the cover when the actuator is under power
or if an explosive atmosphere is present.

Flameproof joints are not intended to be repaired.
It is important not to degrade the explosion-proof protections (surfaces,
cable entries, joints ...). Use the notches or bosses in order to keep
sealing and cover integrity.
Do not bring any modification of any kind to the actuator. Any repair
operation requires a manufacturer agreement.
The actuator mechanical parts are greased for product lifetime and do
not need any specific maintenance. In case of a disassembly/re-
assembly operation, make sure that all moving parts are correctly
greased in order to prevent any electric spark.
Do not bring any modification of any kind to the actuator.
The actuator mechanical parts are greased and do not need any
specific maintenance. In case of a disassembly/re-assembly
operation, make sure that all moving parts are correctly greased in
order to prevent any electric spark.
/
English
Page 14 of 33