Product Model Coding - Milton Roy MAXROY Series Actuator Capacity Control Manual

Technical specifications
Inching/Positioning
Control
Travel Limit
systems
Compliance with
Directives and
Standard
3.2

Product model coding

®
MAXROY , mROY
product family pumps can be ordered with or without an ACC already
attached. The pump model code can be found on the pump name
plate, mounted on the pump.
There are four ACC's type supplied with a pump; these models are
shown in the product model code tables (Table 3). There are several
very similar ACC name plates and some of these are shown in Figure
ACC - ¾ turn
• Command isolated from the feedback signals
• 4-20mA analog input command given through 2
wires
• 4-20mA analog output feedback received through 2
wires
• Limit switches actuated
by adjustable cam-block
• 2 SPDT switches as
standard (Open and
Close) + 2 auxiliary
switches (customer
feedback) 250VAC-5A/
48VDC-2.5A (resistive
load)
ACC actuators comply with:
• Directive 2004/108/EC Electromagnetic compatibility
• Directive 2006/95/EC Low voltage
• The following harmonized standards:
EN 61000-6-4: Generic emissions standard for
industrial environments
EN 61000-6-2: Generic immunity standard for
industrial environments
EN 60034-1: Rotating electrical machines
 Directive ATEX2014/34/UE
Table 2: Technical data
® ®
, MILROYAL , PRIMEROYAL
Page 10 of 33
/
English
®
and PRIMEROY
ACC - 10 turns
Operated by the analog
positioner only
®