DCS BH1-48R Series Installation Instruction page 6

INSTALLATION
BUILT–IN CONSTRUCTION DETAILS
Access Drawers
Cutout dimensions
NOTE: The cutout of each corner should be 90
drawers to fit properly.
* Island installation to use minimum of 3 vents, 10 square inches / 64,5cm
vent (typical).
** For proper support and drawer operation, insure that support boards are
installed per Installation Guide instructions.
MODEL NUMBER
(+0,-1/8)
ADR2-48
ADR2-36
ADR2-30
ADR2-24
To order access drawers or doors, please call DCS Customer Care at 1.888.936.7872 for DCS Dealer in your area.
FIG. 06
º angle in order for the access
2
A B C
(+1/8,-0)
24-1/2"
46" 20"
34" 20" (Min,
28" 20" All
22" 20" Models)
Access Doors -
Cutout dimensions
Vent*
NOTE: The cutout of each corner should be 90
for the access doors to fit properly.
* Island installation to use minimum of 3 vents, 10 square
per
inches / 64,5cm
MODEL NUMBER
ADN1- 20x48
ADN1- 20x36
ADN1- 20x30
ADN1- 20x24
13
Vent*
A
B
90º
Cutout for Access Doors
FIG. 07
angle in order
º
2 per vent (typical).
A B
(+0,-1/8) (+1/8,-0)
46" 20"
34" 20"
28" 20"
22" 20"
Vent*