Troubleshooting - Roksan Audio K3 Manual

ROKSAN K3 POWER AMPLIFIER
MANUAL
If you suspect that your ROKSAN K3 Power Amplifi er is not operating properly, you should
check all the connections carefully. Pay particular attention to speaker phasing and channel
connections. Phono plugs should be fully inserted- a frequent cause of problems is that Phono
plug surrounds do not make proper contact. Below are some commonly encountered problems
with suggestions for possible cure. The list is not exhaustive: If you have any unresolved
problems, please consult your appointed ROKSAN dealer or distributor.
Symptom
Excessive hum
One channel inoperative
No sound
Roksan Audio Ltd declares that the apparatus 'K3 Power Amplifier'complies with the
essential requirements and other relevant provisions of Directive 1999/5/EC.
Do not touch the top of the unit during use because the surface of the unit becomes
hot and may cause burns if touched. A warning sticker is affixed to the top surface to
advise of this.

TROUBLESHOOTING

Likely Cause
Connection loose, cable
faulty
Interconnect or amplifi er
faulty
Incorrect input selection
Suggested Remedy
Re-connect plugs, change
cables
Change lead, try alternative
line input or amplifi er
Use switch to select correct
input