Maintenance - Roksan Audio K3 Manual

ROKSAN K3 POWER AMPLIFIER
MANUAL
Included in the packing of your K3 Power Amplifi er you will fi nd:
One mains lead fi tted with the correct mains power plug for your country.
After removing this item please retain all packing material. Correct packing is necessary for
future transportation of your K3 Power Amplifi er.
After disconnecting the K3 Power Amplifi er from the mains supply, the cabinet and front panel
After disconnecting the K3 Power Amplifier from the mains supply, the cabinet and front panel
may be cleaned with a lightly dampened soft cloth or chamois leather. Avoid using abrasive
may be cleaned with a dry lint-free cloth. Avoid using abrasive substances or solvents.
substances or solvents.
This product is designed to comply with the legal provisions of EU Directives 89/3336/EC and
72/23/EC. The standards which have been applied are those which were in force at the time of
the introduction of this product. This product bears the CE mark. This product must be earthed.
Please ensure that other equipment connected to it is earthed according to the manufacturer's
instructions.
Your K3 Power Amplifi er is set to operate from a fi xed supply voltage which is marked on a
label next to the mains input plug. Before connecting the mains lead please check that your
mains supply corresponds to the label as below:
230V Products: Voltage Range 220V – 240V
115V Products: Voltage Range: 110V – 120V
100V Products : Voltage Range: 90V – 110V
The mains lead supplied with this product has an IEC mains socket which plugs into the IEC
connector on the unit's rear panel. The other end is normally attached to the appropriate mains
plug for your country. In the UK this is the standard UK13A plug.
This plug should ordinarily not be removed from the lead. If you do remove it, please dispose
If the plug becomes damaged or is not suitable for your socket outlet, it should be cut off and
of it safely so that it cannot be plugged into a mains socket whilst in a potentially dangerous
an appropriate plug fitted in its place by a qualified service personnel. The replacement plug
condition. We suggest that you obtain from your dealer a complete set of replacement leads.
Should you move to another area where either the mains voltage or the mains plug are different
should have the same fuse rating as the original plug. The severed plug must be disposed of to
from those as supplied with your Integrated Amplifi er, please contact the appointed ROKSAN
avoid a possible shock hazard and should never be inserted into a mains socket elsewhere.
distributor for assistance.
UNPACKING

MAINTENANCE

EU DIRECTIVES
CAUTIONS
AC MAINS SUPPLY