Fronius Agilo TL Operating Instructions Manual page 6

Grid-connected inverter, explanation of symbols and choice of location, notes regarding installation and connection.
Hide thumbs Also See for Agilo TL:
Table of Contents

Advertisement

4
Do not open the inverter in wet, humid or rain conditions.
Do not install the inverter:
NH
3
-
in areas where ammonia, corrosive vapours, acids or salts are pres-
ent
(e.g. fertiliser stores, ventilation openings from cattle sheds, chemi-
cal plants, tanneries, etc.)
As the inverter generates low levels of noise at certain times, it should
not be installed close to living areas.
Do not install the inverter:
-
in places where there is an increased risk of damage from farm ani-
mals (horses, cattle, sheep, pigs, etc.)
-
in stables or adjoining areas
-
in storage areas for hay, straw, chaff, animal feed, fertilisers, etc.
Do not install the inverter:
-
in places and environments subject to heavy build-up of dust
-
in places and environments in which a heavy build-up of dust con-
taining conductive particles (e.g. iron chips) is likely
Do not install the inverter:
-
in greenhouses
-
in storage or processing areas for fruit, vegetables or winegrowing
products
-
in places used to prepare grain, green fodder or animal feeds

Advertisement

Table of Contents
loading

Table of Contents