Roland VersaCAMM VS-420 Manual page 14

Switching the Ink

Press

2.
Replace the felt wiper.


Detach the old felt wiper.


14
ECO-SOL MAX 3
.
When the screen shown in the figure appears, attach the cover R.
You will open the cover again later in the procedure, so there is no need to fix the
cover in place with screws.
When the screen shown in the figure appears, remove the cover R.
Preparations are complete when this screen appears.
Ink Switching Method
Insert a new felt wiper.
Attach the part to the hooks.
Be sure to attach the part to the hooks. Failure to do so may result
in dot drop-out or other problems.