Switching the Ink
Press
12
ECO-SOL MAX 3
.
When the screen shown in the figure appears, attach the cover R.
You will open the cover again later in the procedure, so there is no need to fix the
cover in place with screws.
When the screen shown in the figure appears, attach the cover L.
You will open the cover again later in the procedure, so there is no need to fix the
cover in place with screws.
When the screen shown in the figure appears, remove the cover L.
Attach the cut rail.
Press
When the screen shown in the figure appears, attach the cover L.
When the screen shown in the figure appears, the cleaning of the periphery of the
print heads (manual cleaning) is finished. Proceed to the next procedure.
Ink Switching Method
.
Screw
Cut rail