Roland VersaCAMM VS-420 Manual page 11

2.
Perform the manual cleaning.




Clean the locations shown in the following figure.
Exercise special care in wiping off any accumulated ink.You can make the accumulated ink easier to clean off by apply-
ing cleaning liquid to cleaning locations
 Also carefully clean the sides of the print heads.
 During this work, be careful not to touch the print head
surface (nozzle surface) directly with the cleaning stick.
Touch the location shown in the figure to discharge any
static electricity.
Put on the pair of gloves (included).
Moisten the cleaning stick with the cleaning liquid.
, , and
Area to clean
Use the cleaning liquid that you have been
using since before switching the ink. Use the
cleaning liquid included with the switching kit
only after you have switched the ink.
, and then wiping these locations off with the cleaning stick.
ECO-SOL MAX3
Switching the Ink
Ink Switching Method
11