Intended Use - Worx WG891E Manual

SyMBOLS
To reduce the risk of injury, user
must read instruction manual
Warning
Wear eye protection
Wear ear protection
Wear dust mask
Do not expose to rain or water
Do not burn
Do not dispose of batteries. Return
exhausted batteries to your local
collection or recycling point
Li
Always charge the battery pack
between temperatures 0
Cordless Li-ion handy saw
OPERATING INSTRUCTIONS

INTENDED uSE:

The machine is intended for sawing wood,
plastic, soft metal and building materials while
resting firmly on the workpiece.
ASSEmBLy
REPLACINg/INSERTINg ThE SAw BLADE
(See Fig. A)
Remove the battery pack from the
socket before carrying out any
adjustment, servicing or maintenance.
when mounting the saw blade, wear
protective gloves. Danger of injury when
touching the saw blade. When changing the
saw blade, take care that the saw blade holder
is free of material residue, e. g. wood or metal
shavings.
1. SELECTINg A SAw BLADE (See A)
NOTE: Only use WORX "U" shank blade that
we provided or standard "T" shank jig saw
blade. DO NOT use reciprocating saw blades.
This handy saw does not accommodate
reciprocating saw blades.
U-blade
2. INSERTINg A SAw BLADE (See B)
C to 30 C
o o
Remove the battery pack from the
socket before carrying out any
adjustment, servicing or maintenance.
Pull down the tool-free blade clamp lever (6),
Insert the blade shank into the blade holder
until it stops. Release the clamp lever (6) to
lock the blade (7/8) in position.
Check the tight seating of the saw blade.
A loose saw blade can fall out and lead to
injuries.
3. REmOVINg A SAw BLADE (See B)
To remove a blade, depress the clamp lever,
pull out the blade.
NOTE: Before using the tool, read the
instruction book carefully.
Typical application
Wood, PVC, etc.
T-blade Soft metal ,etc.
11 11
EN