Elektron MULTIMIG 200 Operation Manual page 20

MULTIMIG 200
Start-up
Fig. 29: select job
Set the required job by turning operation
knob 52.
Confirm the job by pressing operation knob
52.
Active job summary
Tiptronic-Jobs can be set either active or in-
active.
When PowerMaster torch is connected and
Tiptronic function is active, use rocker switch to
switch between active jobs.
Press key Tiptronic 50.
Select menu option „Active Jobs" by turning
operation knob 52.
Confirm menu option „Active Jobs" by
pressing operation knob 52.
A listing of all existing jobs will be displayed
in the menu. All active jobs are marked with
a tick (√) on the right side.
Fig. 30: Active job summary
Select the job to be activated or deactivated
by using operation knob turning knob 52.
Activate or deactivate the job by pressing
operation knob 52.
20
Press key 46, 50 or 51 to exit menu and
return to standard display.
Copying a job
Press key Tiptronic 50.
Select menu option „copy job" by turning
operation knob 52.
Confirm menu option „copy job" by pressing
operation knob 52.
Select the job to be copied by turning op-
eration knob 52.
Fig. 31: Copy job: source
Confirm the job by pressing operation knob
52.
Select the job to be overwritten by turning
operation knob 52.
Fig. 32: Copy job: target
Confirm the job by pressing operation knob
52.
Safety question „copy job?" appears.
Select „YES" to copy by turning operation
knob.