Honeywell Dolphin CT40 Series User Manual page 45

Setting
Data Intent
Symbology Settings
Use the Symbology Settings to enable or disable bar code symbologies for the
selected scan setting profile.
•
•
To view a list of default settings for supported symbologies, see
Decode Settings
Adjust the Decode Settings when scanning bar codes that are densely packed or poor
quality.
Decode Settings
Setting
Center Decode
Decode Security
Decode Filter
Poor Quality 1D
Reading
Dolphin CT40 Mobile Computer
Description
Enables the reception and processing of bar code data
without using an SDK or library.
Tap the check box next to a symbology name to enable (check mark) or disable
(no check mark) decoding for that symbology.
Tap the symbology name to view and modify additional configuration
parameters for the symbology selected.
Description
When enabled, the imager scans and decodes a bar code only if
part of the bar code is at the center of the aimer window. This is
useful in situations where several bar codes may be very close
together in the imager field-of-view.
•
•
•
•
•
•
Use this setting to control the reading tolerance of the decoder.
Lower settings are more lenient when reading low quality bar codes
while higher values are more strict.
Decode filter script and Debug level.
Enable this setting when scanning damaged or badly printed 1-D
bar codes to improve bar code read success.
Tap the check box to toggle the feature on or off.
Center Decode
Select
Honeywell recommends leaving the settings at 50
(default) to define the "center" area for the bar code.
Configurable parameters:
Window top
Window bottom
Window left
Window Right
page
to adjust the Window dimensions.
Default
Disabled
86.
Default
Disabled
2
none
Disabled
35