Instructions for installation, operation and maintenance. Mag drive centrifugal pumps Pump models: CTM 20-7 CTM 25-8 CTM 25-10 Read this instruction manual carefully, STOP before you install and operate the pump...
Tapflo AB, january 1st 2008 Pump code 5. DATA Performance curves Technical data and limits Håkan Ekstrand Managing director 6. WARRANTY & REPAIR Returning parts Warranty Warranty form Instruction manual CTM mag drive pumps IOM manual Tapflo PE & PTFE series pumps...
The personnel in charge of installation, the operation cycle and maintenance of the pumps we produce must be qualified to carry out the operations described in this manual. Tapflo shall not be held respon- sible for the training level of personnel and for the fact that they are not fully aware of the contents of STOP this manual.
It is recommended to use only genuine Tapflo spare parts and approved accessories. The use of non- height of the pump. The suction piping must be without air inlets that are more probable with long original spare parts or non approved accessories will void warranty and removes any responsibility on suction lines or if suction occurs with negative head.
20) YES: overcoming obstacles at lower depths 21) Fix the pump by the fixing holes provided: the supports must be level 22) YES: drainage channel around base Instruction manual CTM mag drive pumps IOM manual Tapflo PE & PTFE series pumps...
In any case, Tapflo advises to service pumps every year of service, even when used in ideal operating The suction shutoff valve (if any) must be completely open.
Damaged impeller Inner bushes worn or damaged Rotating unit out of balance Magnetic coupling damaged or insufficient Wrong assembly or with dirt CTM 25-8 CTM 25-10 Instruction manual CTM mag drive pumps IOM manual Tapflo PE & PTFE series pumps...
Warranty 248.5 334.5 Tapflo warrants products under conditions as below for a period of not more than 12 months from instal- lation and not more than 24 months from date of manufacture. ØP The following terms and condition apply to the sale of machinery, components and related services and products, of Tapflo (hereinafter “the products”)
8 Installation, including electric and other connections to utility mains according to Tapflo drawings, is for the cost and responsibility of the customer, unless otherwise agreed in writing. 9 Tapflo will not be liable on any claim, whether in contact, tort, or otherwise, for any indirect, special, The installation incidental, or consequential damages, caused to the customer or to third parties, including loss of profits, arising by any possible infringement of par.
Page 12
NOTES NOTES Instruction manual CTM mag drive pumps IOM manual Tapflo PE & PTFE series pumps...
Page 13
Kungälv Tapflo Fluid Handling India Private Limited Office No 207, Amar Neptune, Baner, Pune 411045, INDIA Phone : +91 20 65000215 E-mail: ad@tapflo.in Web: www.tapflo.in The perfect choice for your pumping needs...