molex 64000-0041 Manual

Self-contained power manual press for sc power connector.
Hide thumbs Also See for 64000-0041:

Advertisement

64000-0041 Manual Press

FEATURES

Ratchet mechanism to insure full stroke.
Adjustable termination height.
Reversible for right or left hand operation.
Dedicated tooling for quality assembly.

SCOPE

Self-Contained Power Connector Assembly for 14 AWG stranded wire. This connector is designed exclusively for Coleman
Cable E54864-H SEOPRENE 105 14 AWG 3/C SEOOW (UL) 600 V. –50°C to 105°C CSA LL39753-H STOOW (TPE).

OPERATION

1.
Strip cable jacket and pre-form the wires as shown in Figure 1.
2.
Position the clear cover (bottom facing upward) as shown in Figure 2.
1.00"
1.00"
WHITE WIRE
3. Position wires into locator slots. Be certain to place black wire in slot marked BLK, green wire in slot marked GRD, and the white
wire in the third slot. Upon final positioning of all wires, be certain the end of the cable jacket is a minimum of .06" past the
second strain relief rib as shown in Figure 2.
HOUSING ASSY
COVER ASSY
Doc. No. 64000-0041
Revision: A
Operating Instruction Sheet
For 64000-0041 (Manual Press)
For SC Power Connector
Product No. 19403-0011
BLACK WIRE
GREEN WIRE
CABLE JACKET
Figure 1
RIBS
LOCKING
TABS
LOCKING
LATCHES
Figure 3
Release Date: 09/24/02
Revision Date:09/24/02
COVER ASSEMBLY
(BOTTOM FACING
UPWARD)
WIRE LOCAT0R
UNCONTROLLED COPY
STRAIN RELIEF RIB
JACKET
SLOTS
Figure 2
Figure 4
Page 1 of 3
CABLE

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 64000-0041 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for molex 64000-0041

  • Page 1 64000-0041 Manual Press Operating Instruction Sheet For 64000-0041 (Manual Press) For SC Power Connector Product No. 19403-0011 FEATURES • Ratchet mechanism to insure full stroke. • Adjustable termination height. • Reversible for right or left hand operation. • Dedicated tooling for quality assembly.
  • Page 2 64000-0041 Manual Press 4. Position the housing assembly over the cover with the ribs PUSHER in the housing aligned between the latches as shown in MOUNTING Figure 3. Push the two halves together until the locking HOLES tabs engage as shown in Figure 4.
  • Page 3 64000-0041 Manual Press PARTS LIST B…pxÁ HƒipƒÁG€Á 8yrtyppƒtyrÁG€Á 7p„hƒt…t€yÁ PSXÁ G€…p„Ifƒ…Á #!!Á #!!Á Ffy†fwÁIƒp„„Áˆt…sÁS€€wtyrÁ Q89Á É9trÁ$Á 64000-0043 64000-0043 Anvil- Á 64000-0044 64000-0044 Pusher Á 11-31-6356 AM60026-50 Manual Assembly Press (Press Only) 11-31-7151 AM60037-5 Latch Á 11-31-7152 AM60037-6 Latch spring Á...

Table of Contents